How to operate a high speed press correctly?

     High speed stamping press is a kind of high efficient metal processing equipment, which is widely used in automotive, electronics, home appliances and other fields. Correctly operating a high-speed stamping press can improve productivity, ensure the quality of the workpiece and extend the life of the equipment. The following will introduce how to correctly operate the steps and precautions of the rapid stamping press.

I. Operation steps:

1. Check before start-up: make sure the equipment power supply, air source, lubricating oil and so on are normal, check the workpiece clamping situation, clean the worktable and so on.
2. Adjust the mould: according to the requirements of the processed workpiece, choose the suitable mould and adjust the position and angle of the mould to make sure the mould is installed correctly.

 High Speed Press Machine

3. Setting parameters: according to the requirements of the material and size of the workpiece, set the stroke, punch speed, feeding length and other parameters of the press.
4. Starting debugging: according to the requirements of the equipment manual, turn on the gas source and power supply in turn, start the equipment, run it without load, and observe whether the operation of each part is normal.

 High Speed Press Machine

5. Processing workpiece: place the workpiece to be processed on the working table, adjust the position, start the equipment and carry out stamping processing.
6. End operation: when the processing is completed, stop the equipment in time, turn off the power and gas source, clean up the working table and mould, and do a good job of equipment maintenance.

 High Speed Press Machine