OREKU focuses on precision machinery for 25 years

200t High speed precision punching machine

Model: OK-220T Brand:OREKU Takashige Seiki Precision: JIS special grade Speed: 600 times/min Tonnage:220 tonnes Stroke: 30mm Price: Negotiable.

Model: OK-220T
Brand:OREKU Takashige Seiki
Precision: JIS special grade
Speed: 600 times/min
Tonnage:220 tonnes
Stroke: 30mm
Price: Negotiable.

 High speed precision punching machine 200t accessories
1.Electric die height adjustment
2. Die height display precision 0.01
3. Inching function Single function Linkage function
4. Linkage with 0° and 90° positioning and stopping function.
5. Six groups of batch control
6.Two groups of slanting groove control
7. Hydraulic mould locking
8.Hydraulic seat screw pile
9.Hydraulic mould lifter and mould lifting arm
10.Lubricated cooling circulator
11.Independent electric control box
12.Positive and negative reversing device of main machine
13.Integrated brake clutch
14.Spring type anti-vibration feet
15.Working light
16.Maintenance tools and tool box

  High speed precision punching machine 200t optional accessories:

1.Gear feeder (width selection: 150/200/300/400)
2.NC servo feeder
3.Double-head material rack (hydraulic expansion/manual expansion) (width selection: 200/300/400)
4.S-type levelling machine
5.Tonnage detector
6.Lower dead point monitor
7.Electric control box air-conditioner
8.Frequency conversion permanent magnet motor

 
High-speed precision punching machine 200t parameters
Nominal force: 220T
Capacity generating point: 3.2 mm
Stroke: 30 mm
Stroke number:150-600 s.p.m
Working table area:2000×950 mm
Unloading hole: 1400×250 mm
Slide area: 2000×700 mm
Die height adjustment stroke: 370-420 mm
Mould height adjustment motor: 1.5 kw
Feeding line height: 200±15 mm
Main motor: 45 kw
External dimensions: 3060×1940×4332 mm
Total weight:40 tons
High-speed precision punching machine 200t structure


 54.jpg

High-speed precision punching machine 200t stamping products

1-1ZP1145311233.jpg

 High speed precision punch press 200t maintenance:

 1, often keep the centre column, the slider guide column clean, as well as racking the mould to keep the mould base plate free of dirt, to ensure that the platform is clean to avoid scratches. 2, the new machine in the use of 1 month, the flywheel at the addition of grease (including feeder), if not refuelling for a long time, will lead to internal wear of the flywheel, affecting the performance of the machine tool, and each subsequent maintenance also need to be added (high temperature 150 ℃ more than the grease) 

3, the replacement of machine circulating oil: new machine in 1 month to replace 1 time, and then every six months to replace 1 time, to ensure the normal operation and precision of the machine tool (32 # mechanical oil or Mobil 1405 #)
High-speed precision punch press 200t use method:

1, before switching on the machine, you should set the speed potentiometer (W) set on the control panel to the lowest point (O point) position.
2、After the main power switch (DK) is switched on, the power indicator light is on, and the phase sequence indicator light should also be on, otherwise the phase sequence should be checked to see if it is correct.
3、Break the phase after turning on the control circuit with the key switch. Indicator lamp three should be bright at the same time, otherwise should check, troubleshooting.
4, clockwise adjustment of the ‘speed’ potentiometer, the main motor drive flywheel start, the speed should be smooth without vibration, no impact and other phenomena exist.
5, in the process of connecting the main clutch, should be operated at the same time left and right hand. In the process of formal stamping, the external control key switch should be turned on and the key switch of the regulator should be in the state of reset before it can work formally, otherwise the feeding switch and the mould failure signal will be out of control.
6、During the formal stamping process, since the static differential rate of the main motor varies with different loads, when stamping different parts, the electromagnetic counters set on the control board can be used to correct the rotational speed.

      High-speed press is an advanced stamping equipment with the following significant features and advantages:

    High Speed
        Extremely high stamping frequency, up to hundreds or even thousands of times per minute, significantly improving production efficiency.
        It can meet the needs of mass production and quickly complete a large number of stamping tasks.
    High Precision
        Equipped with precise control system and transmission components to ensure the dimensional and shape accuracy of stamped parts.
        Precision stamped products with extremely small tolerance and stable quality can be produced.
    High Stability
        Adopting high-quality materials and advanced manufacturing process to ensure the stability of the equipment in long-time operation.
        Reduce the fault downtime and improve the utilization rate of the equipment.
   

Business philosophy

Dongguan OREKU Precision Machine Tool Co., Ltd., established in 2001, is a high-tech innovative enterprise dedicated to manufacturing high-precision machinery and equipment. Since its establishment, the company has focused on the R&D and manufacturing of CNC precision machining centers, precision stamping machining centers, high-speed vertical lathes and automated production lines, leading the development of the industry.

View more

Contact Us

R&D