Model: OKU-25T
Brand： OREKU C-type punching machine
Precision: JIS special grade
Speed: 1000 times/min
Tonnage：25T
Stroke: 30mm
Price: Negotiable.
25t surgical blade high speed precision punch press accessories:
1. Mold height display
2. inch movement function
Single-action function
Linkage function
3. Vertex stop function
4. Emergency stop function
5. Maximum/minimum speed limit function
6. Abnormal air pressure function
7. Lubrication oil pressure abnormal function
8. Hydraulic mold clamping
9. Dynamic balance
10. Accumulation counting function
11. A set of batch control
12. Punching machine without material automatic stopping device
13.Lubricating oil circulation function
14. Air cushion feet
15.Tool box
16.Working light
25t surgical blade high speed precision punching machine optional accessories:
1.Roller feeder (width option: 105/138mm)
2. Clamp feeder (single/double)
3. Gear feeder (width options: 150/200/300/400)
4.Electronic disk (load capacity 500kg)
5.Single side double hand rewinding machine
6.Single point lower dead center monitor
7.Double-point lower dead center monitor
8.Electric mold adjustment function
25t high speed precision punching machine parameters:
Nominal force: 25T
Stroke: 15/20/25/30/35mm
Stroke number: 200-1000/200-900/200-800/200-800/200-700 s.p.m
Closed height: 188-218/185-215/183-213/180-210/178-208 mm
Table area: 600×330×80 mm
Slider area: 320×220mm
Adjustment amount：30mm
Discharge hole：100×300(400)mm
Motor of main machine：5HP
Total weight：3.6 tons
Circulation system: forced lubrication + oil coolant
Transmission system: Inverter
Clutch & Brake: Air&Friction
Stopping point: Standard
Shock Absorption System: Optional
25t surgical blade high-speed precision press structure
25t Surgical Blade High Speed Precision Press Stamping Products
25t surgical blade high speed precision punch press maintenance:
1, often keep the center column, the slider guide column clean, as well as racking the mold to keep the mold base plate free of dirt to ensure the cleanliness of the platform to avoid scratches. 2, the new machine in the use of 1 month, the flywheel at the addition of grease (including feeder), if not refueled for a long time, will lead to internal wear of the flywheel, affecting the performance of the machine tool, and each subsequent maintenance needs to be added (high temperature 150 ℃ more than the grease)
3, the replacement of machine circulating oil: new machine in 1 month to replace 1 time, and then every six months to replace 1 time, to ensure the normal operation of the machine tool and precision (32 # mechanical oil or Mobil 1405 #)
25t surgical blade high speed precision punching machine use method:
1, before starting the machine, the speed potentiometer (W) set on the control panel should be adjusted to the lowest point (O point) position.
2、After the main power switch (DK) is turned on, the power indicator light is on, and the phase sequence indicator light should also be on, otherwise the phase sequence should be checked to see if it is correct.
3、Break the phase after turning on the control circuit with the key switch. Indicator lamp three should be bright at the same time, otherwise should check, troubleshooting.
4, clockwise adjustment of the "speed" potentiometer, the main motor drive flywheel start, the speed should be smooth without vibration, no impact and other phenomena exist.
5, in the process of connecting the main clutch, should be operated at the same time left and right hand. In the process of formal stamping, the external control key switch should be turned on and the key switch of the regulator should be in the state of reset before it can work formally, otherwise the feeding switch and the mold failure signal will be out of control.
6、During the formal stamping process, since the static differential rate of the main motor varies with different loads, when stamping different parts, the electromagnetic register set on the control board can be used to correct the rotational speed.
High-speed press is an advanced stamping equipment with the following significant features and advantages:
High Speed
Extremely high stamping frequency, up to hundreds or even thousands of times per minute, significantly improving production efficiency.
It can meet the needs of mass production and quickly complete a large number of stamping tasks.
High Precision
Equipped with precise control system and transmission components to ensure the dimensional and shape accuracy of stamped parts.
Precision stamped products with extremely small tolerance and stable quality can be produced.
High Stability
Adopting high-quality materials and advanced manufacturing process to ensure the stability of the equipment in long-time operation.
Reduce the fault downtime and improve the utilization rate of the equipment.
