OREKU focuses on precision machinery for 25 years

C type 25 tonnes high speed punching machine

Model: OREKU-25T Brand: C-type punching machine Precision: JIS special grade Speed: 1000 times/min Tonnage:25 tonnes Stroke: 30mm Price: Negotiable. C type 25 tonnes high speed punch press accessories:

Model: OREKU-25T
Brand: C-type punching machine
Precision: JIS special grade
Speed: 1000 times/min
Tonnage:25 tonnes
Stroke: 30mm
Price: Negotiable.

 C type 25 tonnes high speed punch press accessories:

1. Die height display
2. inch movement function
   Single-action function
   Linkage function
3. Vertex stop function
4. Emergency stop function
5. Maximum/minimum speed limit function
6. Abnormal air pressure function
7. Lubrication oil pressure abnormal function
8. Hydraulic clamping function
9. Dynamic balance
10. Totalised counting function
11. A set of batch control
12. Punching machine without material automatic stopping device
13.Lubricating oil circulation function
14. Air cushion feet
15.Tool box
16.Working light

 
C type 25 tonnes high speed punching machine optional accessories:

1.Roller feeder (width option: 105/138mm)
2. Clamp feeder (single/double)
3. Gear feeder (width options: 150/200/300/400)
4.Electronic disc (load capacity 500kg)
5.Single side double hand rewinding machine
6.Single point lower dead point monitor
7.Double-point lower dead point monitor
8.Electric mould adjusting function

 
C type 25 tonnes high speed punching machine parameters:
Nominal force: 25T
Stroke: 15/20/25/30/35mm
Stroke number: 200-1000/200-900/200-800/200-800/200-700 s.p.m
Closed height: 188-218/185-215/183-213/180-210/178-208 mm
Table area: 600 x 330 x 80 mm
Slider area: 320×220mm
Adjustment amount:30mm
Discharge hole:100×300(400)mm
Motor of main machine:5HP
Total weight:3.6 tons
Circulation system: forced lubrication + oil coolant
Transmission system: Inverter
Clutch & Brake: Air&Friction
Stopping point: Standard
Shock absorbing system: Optional
 
C-type 25 tonnes high speed punch press structure

 1.jpg

C-type 25-tonne high-speed punching machine stamping products

2.jpg


 C-type 25 tonnes high-speed punch press maintenance:

 1, often keep the centre column, the slider guide column clean, as well as racking the mould to keep the mould base plate free of dirt, to ensure that the platform is clean to avoid scratches. 2, the new machine in the use of 1 month, the flywheel at the addition of grease (including feeder), if not refuelling for a long time, will lead to internal wear and tear of the flywheel, affecting the performance of the machine tool, and then every time the maintenance needs to be added (high temperature 150 ℃ more than the grease) 
3, the replacement of machine circulating oil: new machine in 1 month to replace 1 time, and then every six months to replace 1 time, to ensure the normal operation of the machine and precision (32 # mechanical oil or Mobil 1405 #)
C-type 25 tonnes high-speed punching machine use method:
1, before switching on the machine, you should adjust the speed potentiometer (W) set on the control panel to the lowest point (O point) position.
2、After the main power switch (DK) is switched on, the power indicator light is on and the phase sequence indicator light should also be on, otherwise the phase sequence should be checked to see if it is correct.
3、Break the phase after turning on the control circuit with the key switch. Indicator lamp three should be bright at the same time, otherwise should check, troubleshooting.
4, clockwise adjustment of the ‘speed’ potentiometer, the main motor drive flywheel start, the speed should be smooth without vibration, no impact and other phenomena exist.
5, in the process of connecting the main clutch, should be operated at the same time left and right hand. In the process of formal stamping, the external control key switch should be turned on and the key switch of the regulator should be in the state of reset before it can work formally, otherwise the feeding switch and the mould failure signal will be out of control.
6、During the formal stamping process, since the static differential rate of the main motor varies with different loads, when stamping different parts, the electromagnetic counters set on the control board can be used to correct the rotational speed.


   C-type high-speed punch press is a common type of punch press with the following features and advantages:
    Structural features
        The shape is “C” type, open body structure, the operation space is more open, convenient for the installation, debugging and maintenance of the mold.
    Speed advantage
        With the ability of high-speed stamping, the number of stamping times per minute can reach hundreds or even thousands of times, greatly improving the production efficiency.
    Precision performance
        Adopting advanced control system and precise transmission parts, it can realize high stamping precision and ensure the stability of product quality.
    Scope of application
        Widely used in electronics, electrical appliances, hardware and other industries, it can be used for stamping all kinds of small precision parts, such as connector terminals, chip pins and so on.
    Energy-saving features
        Some C-type high-speed presses adopt energy-saving technology, which can effectively reduce energy consumption and production costs.



Business philosophy

Dongguan OREKU Precision Machine Tool Co., Ltd., established in 2001, is a high-tech innovative enterprise dedicated to manufacturing high-precision machinery and equipment. Since its establishment, the company has focused on the R&D and manufacturing of CNC precision machining centers, precision stamping machining centers, high-speed vertical lathes and automated production lines, leading the development of the industry.

View more

Contact Us

R&D