Reasons for choosing OREKU high-speed punch press manufacturer (Parts)

  The following is a brief introduction to each part of OREKU high-speed punch press manufacturer, you need to buy high-speed punch press friends can refer to Oh.
    Accuracy
    Balance is within 2 bars, perpendicularity is within 1 bar, and combined clearance is within 8 bars.
    Castings
    Taiwan foundry, high-strength cast iron, after annealing, vibration stress relief and other processes, so as to ensure long-term accuracy. (Domestic N number of high-speed punch press manufacturers are casting the bed in Hunan, while our bed is Taiwan technology, casting in Guangdong, higher technology, thus ensuring long-term accuracy.)
    Electrical parts
    Switches, buttons, contactors, etc. are equipped with Japan Fuji switch (here only we have a total switch buttons have Japan Fuji, other high-speed punch press manufacturers only in the main switch and other places with Japan Fuji switch, our factory all with Fuji switch, thus ensuring the stability of the machine tool electrical and long-lasting.) This ensures the stability and longevity of the electrical appliances of the machine tools.

High Speed Punching Machine Manufacturer

    Bearing
    We use NSK bearings, which are of stable quality, low wear and long life. (Some manufacturers also claim to be NSK bearings, mostly some domestic unlicensed manufacturers do not get Japan's technical authorization and recognition, our bearings, there are agents of the certificate, can provide certification)
    Paint
    Currently the only one in the punch press industry to do the baking paint (and automotive paint a do practice), only my former one (bed beautiful, easy to clean, keep the company's image)
    Dynamic balance system
    The design of the latest model of the current high-speed punch press reduces the vibration of the punch press to the extreme point, thus ensuring the precision of the stamped products.
    High Speed
    Adopting Taiwan TECO frequency converter and motor, speed control system, the speed can reach 1000r/min per minute, and the speed is stable with zero error.
    Easy upward adjustment of die height system
    Adopting Taiwan's excellent Yamada hydraulic locking pump and Taiwan's accurate die height indicator, the precision is accurate to 0.01mm for easy and accurate adjustment of die height.
    Air Filtration System
    Adopting Taiwan's (Goldware) dichotomous parts to filter out the water in the air to ensure the dryness of the air parts of the press to prolong the life.
    Roller feeder
    Equipped with Taiwan famous brand, such as Pangda or Leicheng, according to customer's demand.
    Shock absorbing feet
    Equipped with Taiwan Yixin air cushion feet, to ensure that the press machine does not have any vibration on the ground, so as to ensure the stable quality of the stamped products.
    Computerized controller
    Equipped with Taiwan imported microcomputer control unit, all the information is displayed on the desktop, easy to work and maintenance, full-featured, such as with the end of the material to detect 1 group, misdirection detection
There are complete functions, such as 1 group of end material detection, 2 groups of mis-feeding detection, 3 groups of scissors system, 2 groups of blowing material, dead stop, emergency stop, double-handed start, counting system and so on.

High Speed Punching Machine Manufacturer

    Solenoid valve
    All adopt American MAC low voltage solenoid valve, low temperature rise, low noise, the speed is accurate to 12000 times/minute.
     Compulsory lubrication system
    Adopting Taiwan Weiliang lubrication system to ensure the lubrication part of the punch press to supply oil, reduce the wear and tear of the punch press, and improve the life of the punch press.
    Oil seal
    Adopt American (MPA) oil seal to reduce the oil leakage of the press and ensure the cleanliness of the press.
    Clutch
    Equipped with Taiwan Hualin dry type, safe and quick working and stopping, no inertia interference.
    Copper bushing
    Adopting Taiwan imported raw materials, good flexibility, dynamic friction is minimized.
    Drawing oil tank
    Adopting solenoid valve and throttle valve synchronized with the microcomputer controller of punching machine, effectively lubricating the punching material and ensuring the quality of the production products.
     Electric control box
    Independent electric control box, all functions and operations of the press are centralized.
    Tool box
    Inflatable nozzle, grease gun, hexagonal wrench, movable wrench.
    High efficiency
    Suitable for mass production of electronic and hardware parts... The maximum punching speed is 800 times/minute.
    High speed stability
    Adopting advanced dynamic balancing system, together with external vibration damping structure, it can still maintain stability and reliability even under the condition of ultra-high speed.
    High precision
    Excellent structural design, advanced and reliable manufacturing methods, Japan NSK bearings and other high-performance components to ensure high static accuracy of the equipment; with the precision feeding mechanism and the high-speed stability of the machine to ensure high dynamic accuracy.
    Precision retention
    1、The crankshaft, worm gear and other key transmission parts adopt precision machining methods and are effectively heat-treated and surface-strengthened to ensure that the key transmission

  High Speed Punching Machine Manufacturer