What tools and materials do I need to prepare before an accuracy check?

   The following tools and materials are usually required before performing a punch press accuracy check:

Accuracy checking tools and materials

    Gauges
        Micrometer: for measuring straightness, parallelism, perpendicularity, etc.
        Percentimeter: to measure smaller displacements and deviations.
        Level: To check the levelness of the punch press.
        Right Angle Ruler: to check the right angle and perpendicularity.
        Calipers: Measure dimensions such as length, width and depth.
    Inspection Rod
        Used to check the concentricity and parallelism of spindle and table.
    Cleaning Tools
        Clean rag: Used to wipe oil and dust from the surface of the punch press to ensure the accuracy of measurement.
        Cleaner: To remove stubborn stains and grease.

Accuracy checking tools and materials

    Marking Tools
        Marking pen: for marking the measurement points.
    Commissioning tools
        Wrenches: Various sizes of wrenches for tightening and adjusting screws.
        Screwdrivers: for removing and installing parts.
    Testing standards
        Standard blocks or standard test pieces of known accuracy for comparing and calibrating measurement results.
    Record forms and pen and paper
        For recording measurement data and inspection results.
    Lighting equipment
        Such as a flashlight to ensure that the inspection area has sufficient light for clear observation and measurement.
    Safety and protective equipment
        Gloves, goggles, etc., to ensure the safety of the operator.
Accuracy checking tools and materials