Recommend some common automatic press mold materials

   Here are some common recommendations for automatic press mold materials:

Automatic Punching Machine Mold Material

    Cr12MoV
        Has high hardness, wear resistance and hardenability.
        Commonly used in the manufacture of molds to withstand large impact loads and require high wear resistance, such as stamping molds convex die, concave die.
    SKD11
        Better toughness, strength and wear resistance is also more excellent.
        It is suitable for complex shapes of molds and stamping molds that require a certain degree of toughness.
    DC53
        Its strength and toughness are higher than SKD11, and wear resistance is also better.
        It is widely used in high-precision, long-life stamping dies.

Automatic Punching Machine Mold Material

    Tungsten Steel (Tungsten Carbide)
        Very high hardness, excellent wear resistance and heat resistance.
        It is suitable for punching high-strength and high-hardness materials as well as high-volume production molds, but the cost is relatively high.
    High-speed steel
        Such as W6Mo5Cr4V2, etc., with good hot hardness and wear resistance.
        Commonly used in the manufacture of high-speed stamping molds.
    Alloy tool steel
        Such as 9SiCr, etc., with good hardenability and wear resistance.
    Carbon tool steel
        Such as T8A, T10A, etc., lower cost, but wear resistance and toughness is relatively weak.
        Suitable for some simple, small batch production of stamping molds.
    In the selection of mold materials, according to the specific stamping process, punching materials, production batch as well as the complexity of the mold and other factors into account to ensure that the performance and life of the mold to meet the production requirements.

Automatic Punching Machine Mold Material