What is the best way to match the speed and pressure of a press for stamping connector terminals?

     In order to make the press machine stamping insert terminals when the speed and pressure to achieve the best matching effect, need to take into account a number of factors.
   First of all, it is necessary to clarify the material properties, thickness, shape complexity, and quality requirements for the finished product.

    Stamping presses for connector terminals

    Generally speaking, if the terminal material is softer, thinner and relatively simple shape, then you can appropriately increase the stamping speed, and correspondingly reduce the pressure. This can ensure production efficiency, but also to avoid excessive pressure on the material caused  by excessive deformation or damage.

   Stamping presses for connector terminals

    On the contrary, if the terminal material hardness is high, thickness is large or complex shape, this time should reduce the stamping speed, while increasing the pressure to ensure that the terminals can be completely molded, and does not appear cracks, wrinkles and other defects.
     In addition, it is necessary to find the most suitable combination of speed and pressure through continuous testing and adjustment. During the test process, the stamping results of the terminals are closely observed, including dimensional accuracy, surface quality, shape integrity, etc.,

and the speed and pressure are fine-tuned according to the actual situation until the best results are achieved.

Stamping presses for connector terminals