Punching Machine Operating Procedures

   Punching Machine Operating Procedures

  1、People working on the punching machine must complete relevant studies to gain an in-depth understanding of the structure and function of the punching machine and an in-depth understanding of the operation process, and only after obtaining the appropriate operating authorization can they carry out independent operations.
   2、When using the safety protection and control equipment on the punching machine, they must make sure that it is operated correctly and cannot be dismantled arbitrarily.
  3、Ensure that the key parts of the punch press such as transmission, connection and lubrication as well as the guards are in normal working condition, and make sure that the mounted mold screws are solid and cannot be shifted in any way.High-speed press stamping speed

  4、Before starting the work, the punch press should be kept in vacant operation for 2-3 minutes, and carefully check the flexibility of the foot brake and other control equipment, only after confirming that everything is normal can we start to use it, and it is strictly forbidden to run it under the condition of illness.High-speed press stamping speed

   5. When operating the dies, always make sure that they are structurally sound, and that the upper and lower dies are aligned and that they are in the correct position. Use your hand to move the press for test punching (i.e., empty) to ensure that the dies work properly in the best condition.
  6、Be sure to lubricate and remove all floating items from the press before you start driving.
   7、When making punching movements or operating the punching system, the operator should maintain a proper standing position, make sure that there is a proper distance between his hands and head and the punching machine, and always pay attention to the movements of the punching head, and it is absolutely forbidden to engage in idle chatter with others.
   8、When punching shorter workpieces, special tools should be used to avoid feeding or picking up workpieces directly by hand.
   9, in the process of making punching or long body parts, safety brackets should be installed or other safety measures should be implemented to prevent injuries caused by excavation.
   10、When single punching, hands and feet are not allowed to be placed on the hand and foot gates, and must be punched once and moved (stepped on) to prevent accidents.
   11, more than two people operating together, responsible for moving (pedal) gate, must pay attention to the action of the feeder, is strictly prohibited on one side of the fetch, one side of the moving (pedal) gate.
    12, the end of the work in a timely manner to stop, cut off the power supply, wipe the machine tool, organize the environment.

    High-speed press stamping speed