Introduce the operation specification of shrapnel punching machine

vThe following are the operating specifications for the shrapnel press:

Before starting the machine:

    Check whether the appearance of the equipment is intact, whether the parts are firmly connected, and whether there is any looseness or damage.
    Confirm that there is no debris around the punch press and the working area is clean and tidy.
    Check the lubrication system to ensure that the lubricant quantity is sufficient and the oil circuit is smooth.
    Check whether the mold is installed correctly and firmly, and whether there is any damage on the surface of the mold.
high speed punching machine 

Power on the machine:
    Turn on the power, start the punching machine, let the equipment idle for a period of time, check whether the equipment is running normally, and whether there is any abnormal noise or vibration.
    Adjust the stroke, speed and other parameters of the punching machine to make it meet the current production requirements of shrapnel processing.
Production operation:
    Place the material to be processed in the correct position to ensure accurate positioning.
    Press the start button with both hands at the same time to carry out the punching operation, it is strictly prohibited to operate with one hand or press the start button with other objects.
    During the stamping process, pay close attention to the operation status of the press and the stamping quality of the shrapnel, if any problem is found, stop the machine immediately.
Stop operation:
    After completing the production task, press the stop button to stop the press operation.
    Clean up the residual materials and waste materials on the working table and keep the working area tidy.

Equipment Maintenance:
    Regularly clean dust and oil from the surface of the equipment to keep the appearance of the equipment clean.
    Perform lubrication and maintenance on equipment at specified intervals and replace worn parts.
    Regularly check the electrical system to ensure that the wiring is connected properly and there are no short circuits, breaks, or other problems.

high speed punching machine 
Safety Precautions:
    Operators must be professionally trained and familiar with the operating methods and safety procedures of the equipment.
    Wear necessary protective equipment, such as earplugs and goggles.
    It is forbidden to carry out any maintenance and debugging work while the punch press is running.
    It is strictly prohibited to overload the punch press to avoid equipment damage and safety accidents.

high speed punching machine