What are some of the safety devices that can be used on a shrapnel press?

   The following are some of the safety devices that can be applied to shrapnel presses:
high speed stamping machine

    Protective doors
        Installed around the work area of the punch press to prevent accidental access to the operator's body parts.
    Light curtain protection device
        Consists of a transmitting end and a receiving end. When the light curtain is blocked, the punch press stops immediately.
    Two-handed operation buttons
        Requires the operator to press both buttons at the same time to start the press, avoiding the other hand being in the danger zone when operating with one hand.
    Emergency Stop Button
        Usually in eye-catching red color, it can quickly stop the press in case of emergency.

high speed stamping machine

    Mechanical Clutch and Brake
        Ensure that the press is quickly and accurately braked when stopped to prevent accidental starting.
    Stroke Limiters
        Limit the stroke of the punch press slide to prevent accidents caused by over-stroke operation.
    Overload protection device
        Automatically stops the press when the punching force exceeds the set value to protect the equipment and the operator.
    Interlocking device
        For example, the press cannot be started when the guard door is not closed; the guard door cannot be opened when the press is running.
    Warning signs
        All kinds of safety warning signs are posted at conspicuous positions to remind operators to pay attention to safety.
    Vibration Dampening Device
        Reduce the vibration generated during the operation of the press to minimize the impact on the operator and improve the stability of the equipment.

high speed stamping machine