On a 63-ton punch press, the X-axis is an axis.

   On a 63-ton punch press, the X-axis is an axis.

1. The X-axis is defined as the lateral movement axis of the punch press manipulator, and its lateral movement range depends on the lateral distance between the punch press and the punch press pallet.

   
   2. The Y-axis is defined as the axis of lateral movement of the punch press manipulator. The range of its lateral movement depends on whether the special manipulator of the injection molding machine moves the part on the side of the injection molding machine or at the rear. With this axis travel, the product is removed from the mold of the injection molding machine and moved laterally to a specific area outside the safety gate.

   
   

High-speed punch press structure

3. Z-axis: This is a robot designed for injection molding machines that moves vertically up and down and adjusts to the height of the product. This means that the height of the manipulator designed for the injection molding machine must be high enough to both remove the part from the mold of the injection molding machine and to easily move the product laterally from the safety gate of the injection molding machine, ensuring that the part is placed at the proper height above the floor.High-speed punch press structure

High-speed punch press structure