What safety regulations should punch press workers pay attention to when operating

    I. Check whether the moving part of the press is filled with lubricant before working. Then start the press and check whether the clutch and brake are normal, and idle the machine for 1-3 minutes, it is forbidden to operate the machine when it is faulty.
Secondly, when replacing the mould, firstly turn off the power and stop the operation of the moving part of the press before starting to install and debug the mould.

    High Speed Punching Machine

   After installation and adjustment, move the flywheel by hand for two times to check the accuracy before starting the press.
   Four, must wait for all other personnel to leave the punch press work area, and take away the sundries on the workbench before starting the power supply to start the punch press.
   After the punch press is started, one person shall operate the punch press, and others shall not press the electric building or step on the foot switch plate, and they shall not put their hands into the working area of the punch press or touch the moving part of the punch press with their hands.

   High Speed Punching Machine

    When the press is working, it is forbidden to put the hand into the working area of the slider, and it is forbidden to take or put the workpiece by hand. When picking up or placing workpieces in the punch mould, tools that meet the standard must be used.
   Seven, if you find the punch press has abnormal sound or machine failure, you should immediately turn off the power switch for inspection.

    High Speed Punching Machine

  Eight, the operation must be concentrated, no idle talk, cooperate with each other to ensure the safety of operation.
   Nine, punching machine workers shall not work continuously for more than eight hours per shift, the operator must not operate in a state of irritability, fatigue, in order to avoid accidents.