oreku high-speed press stamping die gaskets

   Stamping high speed press oreku high speed press stamping die shims stamping shims stamping site.hardware stamping video

   1, the acquisition of plate: in accordance with the requirements of the acquisition of the required materials, the required thickness of the plate;
   2, stamping: in accordance with the requirements of stamping out the internal and external holes of the gasket, at this time the punch press to configure the corresponding mold;hardware stamping video

   3, heat treatment: most of the gaskets do not need heat treatment, special requirements are required;
   4, plating: if the required surface treatment can be achieved through the acquisition of the plate, there is no need for plating, if not then need plating;

hardware stamping video