OREKU PRESS MACHINE CONTROL BOX WIRING TUTORIAL ПPECC-MALIVHA, VERSUS BRUDERER HIGH SPEED PUNCHING MACHINE

    In general, the following steps need to be followed for wiring the control cabinet:
    Confirm the specifications and models of the power and control wires to ensure that they meet the requirements of the control cabinet and punch press.
    Connect the power and control wires to the corresponding terminals according to the wiring diagram of the control cabinet. During the wiring process, it is necessary to pay attention to the color and marking of the wires to ensure proper connection.

Antenna Shrapnel High Speed Punching Machine

    For control cabinets and presses that require grounding, the ground wire needs to be connected to the ground terminal.
    After the wiring is complete, it needs to be checked and tested to ensure that it is correct. This can be done using a tool such as a multimeter.
    After confirming that the wiring is correct, you can connect the control cabinet and the power supply of the punch press to carry out trial operation and commissioning.
   It should be noted that the control cabinet wiring needs to be operated by a professional electrical engineer or technician to ensure safety and correctness. If you are not familiar with the electrical wiring operation, it is recommended not to try it by yourself to avoid danger.

Antenna Shrapnel High Speed Punching Machine

Antenna Shrapnel High Speed Punching Machine