Punching machine manufacturer: the correct use of gantry punch press moulds

    Correct use of gantry punch press moulds

       Inspection before installation:
        Strictly inspect the moulds, remove the dirt and ensure that the mould guide bush and the mould are well lubricated.
        Confirm that the edge of the die is sharp, without chipping or missing corners.

Punching machine manufacturer

    Installation process:
        Follow the installation procedure to ensure that the convex and concave moulds are in the same direction, especially for moulds with directional requirements.
        After installation, check whether the fastening screws on the mould mounting base are locked correctly.

Punching machine manufacturer

    Use and Maintenance:
        Attention should be paid to lubrication and maintenance when the mould is in use, so as to prevent the mould from carrying material and causing waste to rebound.
        Convex and concave mould edges should be sharpened in time to avoid expanding the degree of wear.
        The moulds should be put back to the designated position in time after use and treated with oil to prevent rust.
        Replace the spring of the mould regularly to prevent the spring from being damaged by fatigue.

Punching machine manufacturer

    Correct use of gantry punch press mould can not only improve production efficiency, but also extend the service life of the mould and ensure the quality of punched parts. Therefore, operators should strictly abide by the operating procedures and do a good job in the daily maintenance and repair of the mould.