What is the difference between a high-speed punch press and an ordinary punch press in terms of maintenance?

   High-speed punch press and ordinary punch press in the maintenance of the following differences:
   Frequency requirements: high-speed punch presses due to the fast running speed, load, usually need more frequent maintenance; ordinary punch presses can be relatively lower frequency.
   Precision adjustment: high-speed punch presses require higher precision, maintenance needs to pay more attention to the detection and adjustment of stamping precision; ordinary punch presses in this regard, the requirements are slightly lower.
   Lubrication system: the lubrication system of high-speed press is more complicated and critical, and needs more careful inspection and maintenance to ensure good lubrication effect; the lubrication requirement of ordinary press is relatively simple.
   elbow joint type high-speed punch presses

high-speed punch press working principle

high-speed punch press working principle

   Inspection of moving parts: the moving parts of high-speed press may wear faster, and need to pay closer attention to their status, timely replacement or repair; the inspection cycle of the moving parts of ordinary press can be a little longer.
   Control system inspection: the advanced control system of high-speed press needs regular software update and hardware inspection to guarantee its performance; the control system of ordinary press is relatively simple and the maintenance task is lighter.
  Maintenance of vibration-damping parts: high-speed presses may have higher requirements for vibration-damping, and the maintenance of vibration-damping parts is more important; ordinary presses have a slightly lower degree of concern in this regard.

elbow joint type high-speed punch presses

elbow joint type high-speed punch presses