What are the operating procedures for high-speed punch presses?

     The operator must learn and master the structure and performance of the press, familiar with the operating procedures and obtain the operating license to operate independently; the correct use of safety protection and control devices on the press, and shall not be arbitrarily dismantled;

   metal stamping press manufacturers

      Check whether the transmission, connection, lubrication and other parts of the press and the protection and insurance devices are normal, the mold screws must be firmly installed and must not be moved; the press should be run for 2-3 minutes before work, check the flexibility of the foot brake and other control devices to confirm the normal before use, and must not be operated with disease;

   metal stamping press manufacturers

       Installation of molds should be tight and firm, the upper and lower molds to ensure the correct position, hand transfer punch test punch (empty), to ensure that the molds are in good condition to work; before driving attention to lubrication and remove all floating items on the punch press; punching or running punch, the operator to stand properly, hands and head should be kept at a certain distance from the punch press, and always pay attention to the punch action, is strictly prohibited to gossip with others;
     metal stamping press manufacturers