Model: OKU-85HK
Brand:OREKU Precision Machine
Precision: JIS Special Grade
Speed: 700 times/min
Tonnage: 85 tons
Travel: 30mm
85 tons precision high speed punch press parts:
1.Electric mold height adjustment
2. Module height display accuracy of 0.01
3. Inching function, single action function, linkage function
4. The linkage has 0 ° and 90 ° positioning parking functions
5. Six groups of batch control
6. Two sets of inclined groove control
7. Hydraulic locking mold
8. Hydraulic engine base screw pile
9. Hydraulic mold lifter and mold arm
10. Lubricating cooling circulation machine
11. Independent electronic control box
12. Host forward and reverse device
13. Integrated brake clutch
14. Spring type shock-absorbing foot pads
15. Work lights
16. Maintenance tools and toolboxes
Optional accessories for 85-ton precision high-speed punch press:
1. Gear feeder (width selection: 150/200/300/400)
2. NC servo feeder
3. Double head material rack (hydraulic expansion/manual expansion) (width selection: 200/300/400)
4. S-type leveling machine
5. Tonnage detector
6. Bottom dead center monitor
7. Electric control box air conditioning
8. Variable frequency permanent magnet motor
85 ton precision high-speed punch parameters
Nominal force: 85T
Ability occurrence point: 2.0 mm
Stroke: 30 mm
Strokes: 150-700 s.p.m
Workbench area: 1100 x 750 mm
Cutting hole: 800 x 150 mm
Sliding seat area: 1100 x 500 mm
Mold height adjustment stroke: 330-380 mm
Module height adjustment motor: 0.75 kW
Main motor: 22 kW
External dimensions: 2180 x 1680 x 3890 mm
Total weight: 18 tons
85 ton precision high-speed punch structure
85-ton precision high-speed press for stamping products
Maintenance of 85 ton precision high-speed punching machine:
1. Regularly keep the center pillar and slider guide pillar clean, and ensure that the bottom plate of the mold is free of dirt during mold installation to ensure the cleanliness of the platform and avoid scratches. 2. When using a new machine for one month, add butter to the flywheel (including the feeder). If there is no oil added for a long time, it will cause internal wear of the flywheel and affect the performance of the machine tool. In the future, it is also necessary to add butter that can withstand high temperatures above 150 ℃ for each maintenance
3. Replacement of machine circulating oil: The new machine should be replaced once within a month, and then every six months to ensure the normal operation and precision of the machine tool (32 # mechanical oil or Mobil 1405 #)
Usage of 85 ton precision high-speed punching machine:
1. Before starting up, the speed control potentiometer (W) set on the control panel should be adjusted to the lowest point (O point) position.
2. After the main power switch (DK) is turned on, the power indicator light should be on, and the phase sequence indicator light should also be on. Otherwise, check if the phase sequence is correct.
3. Turn on the control circuit with the key switch and disconnect the phase. The three indicator lights should light up simultaneously, otherwise they should be checked and the fault should be eliminated.
4. Clockwise adjust the "speed regulation" potentiometer, the main motor drives the flywheel to start, and the speed should be stable without vibration or impact.
5. During the process of connecting the main clutch, both hands should operate simultaneously. During the formal stamping process, the external control button switch should be turned on and the adjustment button switch should be in a reset state before it can officially work, otherwise the feeding switch and mold fault signal will lose control.
6. During the formal punching process, due to the variation of the static error rate of the main motor with different loads, an electromagnetic counter set on the control board can be used to correct the speed when punching different parts.
Gantry Precision Punching Machine is a kind of stamping equipment with high accuracy and stability.
Its features include:
Sturdy structure: the gantry design makes the equipment have high rigidity and stability, which can withstand large punching pressure and ensure that the precise position and shape are maintained during the stamping process.
High precision: the use of advanced control system and precision transmission components can realize high-precision stamping action and ensure the dimensional accuracy and surface quality of the stamped parts.
Large stroke: usually with a large stamping stroke, suitable for processing larger size workpieces or carrying out complex stamping process.
High degree of automation: it can be used in conjunction with automated feeding and unloading devices to improve production efficiency and reduce manual operation.
Widely used: widely used in automobile manufacturing, electronic equipment, hardware accessories and other industries for the production of various precision stamping parts.
