OREKU focuses on precision machinery for 25 years

125 Ton High-Speed Precision Stator Rotor Punching Machine

Nominal force: 125T Ability occurrence point: 3.2 mm Stroke: 30 mm Strokes: 150-700 s.p.m Workbench area: 1400 x 850 mm Cutting hole: 1100 x 200 mm Sliding seat area: 1400 x 600 mm Mold height adjustment stroke: 360-410 mm Module height adjustment motor: 0.75 kW Main motor: 37 kW External dimensions: 2350 x 1800 x 4105 mm Total weight: 27 tons Structure of precision high-speed fixed rotor punching machine​

Model: OKU-125T
Brand: OREKU High Precision Machine
Precision: JIS Special Grade
Speed: 700 times/min
Tonnage: 125 tons
Travel: 30mm
Price: negotiable.

125 ton high-speed precision stator rotor punching machine accessories:

1. Electric mold height adjustment
2. Module height display accuracy of 0.01
3. Inching function, single action function, linkage function
4. The linkage has 0 ° and 90 ° positioning parking functions
5. Six groups of batch control
6. Two sets of inclined groove control
7. Hydraulic locking mold
8. Hydraulic engine base screw pile
9. Hydraulic mold lifter and mold arm
10. Lubricating cooling circulation machine
11. Independent electronic control box
12. Host forward and reverse device
13. Integrated brake clutch
14. Spring type shock-absorbing foot pads
15. Work lights
16. Maintenance tools and toolboxes

125 ton high-speed precision stator rotor punching machine optional accessories:

1. Gear feeder (width selection: 150/200/300/400)
2. NC servo feeder
3. Double head material rack (hydraulic expansion/manual expansion) (width selection: 200/300/400)
4. S-type leveling machine
5. Tonnage detector
6. Bottom dead center monitor
7. Electric control box air conditioning
8. Variable frequency permanent magnet motor

Precision high-speed fixed rotor punching machine parameters:
Nominal force: 125T
Ability occurrence point: 3.2 mm
Stroke: 30 mm
Strokes: 150-700 s.p.m
Workbench area: 1400 x 850 mm
Cutting hole: 1100 x 200 mm
Sliding seat area: 1400 x 600 mm
Mold height adjustment stroke: 360-410 mm
Module height adjustment motor: 0.75 kW
Main motor: 37 kW
External dimensions: 2350 x 1800 x 4105 mm
Total weight: 27 tons

Motor fixed rotor punching machine Structure:

125 Ton High-Speed Precision Stator Rotor Punching Machine

Precision high-speed fixed rotor punch stamping products

High-Speed Precision Stator Rotor Punching Machine

Maintenance of precision high-speed fixed rotor punching machine:
1. Regularly keep the center pillar and slider guide pillar clean, and ensure that the bottom plate of the mold is free of dirt during mold installation to ensure the cleanliness of the platform and avoid scratches. 2. When using a new machine for one month, add butter to the flywheel (including the feeder). If there is no oil added for a long time, it will cause internal wear of the flywheel and affect the performance of the machine tool. In the future, it is also necessary to add butter that can withstand high temperatures above 150 ℃ for each maintenance. 3. Replacement of machine circulating oil: The new machine should be replaced once a month, and then every six months to ensure the normal operation and precision of the machine tool (32 # mechanical oil or Mobil 1405 #)

Usage of precision high-speed fixed rotor punching machine:
1. Before starting up, the speed control potentiometer (W) set on the control panel should be adjusted to the lowest point (O point) position.
2. After the main power switch (DK) is turned on, the power indicator light should be on, and the phase sequence indicator light should also be on. Otherwise, check if the phase sequence is correct.
3. Turn on the control circuit with the key switch and disconnect the phase. The three indicator lights should light up simultaneously, otherwise they should be checked and the fault should be eliminated.
4. Clockwise adjust the "speed regulation" potentiometer, the main motor drives the flywheel to start, and the speed should be stable without vibration or impact.
5. During the process of connecting the main clutch, both hands should operate simultaneously. During the formal stamping process, the external control button switch should be turned on and the adjustment button switch should be in a reset state before it can officially work, otherwise the feeding switch and mold fault signal will lose control.
6. During the formal punching process, due to the variation of the static error rate of the main motor with different loads, an electromagnetic counter set on the control board can be used to correct the speed when punching different parts.

      High-speed press is an advanced stamping equipment with the following significant features and advantages:

    High Speed
        Extremely high stamping frequency, up to hundreds or even thousands of times per minute, significantly improving production efficiency.
        It can meet the needs of mass production and quickly complete a large number of stamping tasks.
    High Precision
        Equipped with precise control system and transmission components to ensure the dimensional and shape accuracy of stamped parts.
        Precision stamped products with extremely small tolerance and stable quality can be produced.
    High Stability
        Adopting high-quality materials and advanced manufacturing process to ensure the stability of the equipment in long-time operation.
        Reduce the fault downtime and improve the utilization rate of the equipment.
   

Business philosophy

Dongguan OREKU Precision Machine Tool Co., Ltd., established in 2001, is a high-tech innovative enterprise dedicated to manufacturing high-precision machinery and equipment. Since its establishment, the company has focused on the R&D and manufacturing of CNC precision machining centers, precision stamping machining centers, high-speed vertical lathes and automated production lines, leading the development of the industry.

View more

Contact Us

R&D