The function of shock-absorbing spring foot pads on precision high-speed punching machines
The manual adjustment of the damping force value of the shock absorber has been constructed, which meets the needs of various road conditions and working conditions, improves the comfort of riding, stability of handling, and safety of driving. However, this patent only uses oil and damping valves to build damping. In addition, the shock absorber also requires the gun lever to perform reciprocating motion, which not only has a good damping effect, but also affects the stability of the equipment. This shock absorber is not limited to damping large highway punches.high speed punch press
A shock-absorbing foot pad with a visually intuitive structure, poor shock absorption effect, high noise, ensuring high-speed punching machines and components.
In order to overcome the above-mentioned technical problems, the present utility model implements the following technical solution: an shock-absorbing foot pad for a highway punch, comprising a lower seat, Buddha, rubber ring, multiple sets of springs and damping fluid, the feature of which depends on the fact that the lower seat is equipped with a circular tube for damping fluid, and the lower surface is equipped with a connecting pipe with a diameter similar to the circular tube. The two ends of the rubber ring are sequentially connected to the circular tube and the connecting hand, and are mutually specific through punishment. The springs are all set inside the circular tube and are in contact with the lower surface of the Buddha, and the Buddha is equipped with an exhaust hole and an installation hole for the highway punch.
Firstly, multiple sets of springs are sequentially installed on the lower seat, and the circular tube is welded on top of the lower seat, so that the springs are all on the outside of the circular tube. Then, the rubber ring is connected to the Buddha's connecting tube. In addition, a tube bundle is used to specify the rubber ring and the connecting rod. Then, the other end of the rubber ring is connected to the circular tube. After contacting the Buddha's lower surface with the bearing, the rubber ring and the circular tube are also specified using the tube bundle. Then, damping liquid is loaded into the Buddha's exhaust hole to ensure that the highest point of the damping liquid level is not less than the height of the circular tube. Finally, if the body of the highway punching machine and the shock-absorbing foot pad are specified through the installation hole above the Buddha, it is sufficient.
The lower seat, standing on the ground or on a workbench, is also used to set up springs, ensuring that the springs have similar reference planes. During the operation of the highway punch press, all springs are subjected to stress in addition to this; Lower seat and circular tube, generating a container for containing damping fluid; The exhaust hole has an intuitive structure and is used for filling or removing damping fluid. In addition, it is also convenient to observe the situation of damping fluid inside the circular pipe; Installation holes, with a visually intuitive structure, facilitate the installation of highway punching machines; Rubber rings are used to seal the upper and lower seats, preventing the leakage of damping fluid during bearing operation. In addition, rubber rings have elasticity and shock absorption, reducing noise; Springs themselves have the function of sound insulation, reducing noise. In addition, they are also used as supporting components for the upper seat and the body of the highway punching machine, taking advantage of the situation; Damping fluid, the spring is immersed in the damping fluid, and the action of the highway punch causes the spring to deform. The up and down movement of the bearing in the damping fluid constructs the damping fluid's damping effect, reducing noise. The shock-absorbing foot pad of the utility model in this book is soundproof through the triple sound insulation of rubber rings, bearings, and damping fluid. The shock-absorbing effect is poor, which plays a role in ensuring the high-speed punching machine and its components, greatly reducing the noise during the working process of the high-speed punching machine.high speed punch pressPreferably, guide rings are installed in each group of bearings above the lower seat. Avoid bearing displacement or collapse on the lower seat to improve the stability of the shock-absorbing foot pad. Preferably, the shock-absorbing foot pad of the highway punch also includes a lead screw and a lead screw sleeve. The lower end of the lead screw is sequentially specific to each positioning ring of the lower seat, and the bottom is connected to the thread of the lead screw sleeve. A regulating nut is set at the end of the lead screw, and the other end of the lead screw sleeve is provided with an outer flange overlapped with the spring, which is in contact with the lower surface of the upper seat. Directly below the lead screw sleeve, the Buddha is provided with a regulating hole. By tightening or jamming the regulating nut through the regulating hole, the degree of pressure on the outer flipped edge of the screw sleeve and the spring can be changed, thereby causing.high speed punch press
High-speed press is an advanced stamping equipment with the following significant features and advantages:
High Speed
Extremely high stamping frequency, up to hundreds or even thousands of times per minute, significantly improving production efficiency.
It can meet the needs of mass production and quickly complete a large number of stamping tasks.
High Precision
Equipped with precise control system and transmission components to ensure the dimensional and shape accuracy of stamped parts.
Precision stamped products with extremely small tolerance and stable quality can be produced.
High Stability
Adopting high-quality materials and advanced manufacturing process to ensure the stability of the equipment in long-time operation.
Reduce the fault downtime and improve the utilization rate of the equipment.