OREKU focuses on precision machinery for 25 years

Motor Stator High Speed Punching Machine

Model: MARX-40T Brand:Oreku Elbow Joint Punching Machine Precision: JIS special grade Speed: 1250 times/min Tonnage: 40 tons Stroke: 40mm Price: Negotiable.

Model: MARX-40T
Brand:Oreku Elbow Joint Punching Machine
Precision: JIS special grade
Speed: 1250 times/min
Tonnage: 40 tons
Stroke: 40mm
Price: Negotiable.

 Motor stator high speed punch press accessories:
1.Universal frequency converter + speed regulating shaft motor
2.Combined pneumatic clutch brake
3.Dynamic balancing device (weight selective)
4. Electronic cam switch
5. Stop angle automatic correction device
6.Electronic crankshaft angle indicator gauge
7. Touch screen (Chinese: Simplified)
8.Speedometer
9.Total counter electronic 8 digits (touch screen)
10. Preset counter electronic 8-digit (touch screen)
11.Closed mold height display
12.Timer 7 digits
13.Motorized slide adjuster
14. Socket for misfeed (with switch) 1pc.
15.1 socket for stopping the tension limit
16.Micro inch movement
17.Circulating oil control unit
18.Air control unit
19.Material oil feeding device (with solenoid valve)
20.Safety door (front up/down type only)
21.Motor reversing device
22.Full stop circuit
23. Operating cabinet (with rolling wheels) body operating panel
24. Two-handed button (with 1-point CASE)
25.Oil temperature cooling device
Motor Stator High Speed Punching Machine Optional Accessories:
1.Anti-vibration device
2.Precision cam-clamp feeder
3. One material guide (to the working end surface)
4. Lower dead center detector
5. Cut-off counter (electronic 6-digit) 2 sets
6. Air injector (with solenoid valve) DC
7. Material drop hopper
8.Material end stop switch (proximity type)
9.Flywheel brake
Motorized Stator High Speed Punching Machine Parameters
Model: MARX-40T
Pressurizing capacity: 400KN
Stroke: 16/20/25/30 mm
Stroke number:200-1250/200-1200/200-1050/200-900 spm
Closed mold height: 190-240 mm
Adjustment of slide: 50 mm
Slider size: 600×300 mm
Size of working table:600×400 mm
Table thickness: 90 mm
Table opening size: 400 (top) × 350 (bottom) × 60 mm
Table opening size: 400×100 mm
Main motor:11×4P kw
Upper mold weight:MAX80 kg
Total weight: 6500 kg
External dimensions:1780×3075×1210 mm
Structure of motor-stator high-speed punch press

马达定子高速冲床结构
Stamping Machinery, Precision High-speed Press machines, Precision Machine Tool Equipment

Motor Stator High Speed Punch Press Products

马达定子高速冲床冲压产品

 Motor stator high-speed punch press maintenance
 1, often keep the center column, the slider guide column clean, as well as racking the mold to keep the mold base plate free of dirt to ensure the cleanliness of the platform to avoid scratches. 2, the new machine in the use of 1 month, the flywheel at the addition of grease (including feeder), if the long time no refueling, will lead to internal wear and tear of the flywheel, affecting the performance of the machine tool, and then every time the maintenance needs to be added (high temperature 150 ℃ more than the grease) 
3, the replacement of machine circulating oil: new machine in 1 month to replace 1 time, and then every six months to replace 1 time, to ensure the normal operation of the machine tool and precision (32 # mechanical oil or Mobil 1405 #)
Motor stator high-speed punch press use method
1, before starting the machine, the speed potentiometer (W) set on the control panel should be adjusted to the lowest point (O point) position.
2、After the main power switch (DK) is turned on, the power indicator light is on, and the phase sequence indicator light should also be on, otherwise the phase sequence should be checked to see if it is correct.
3、Break the phase after turning on the control circuit with the key switch. Indicator lamp three should be bright at the same time, otherwise should check, troubleshooting.
4, clockwise adjustment of the “speed” potentiometer, the main motor drive flywheel start, the speed should be smooth without vibration, no impact and other phenomena exist.
5, in the process of connecting the main clutch, should be operated at the same time left and right hand. In the process of formal stamping, the external control key switch should be turned on and the key switch of the regulator should be in the state of reset before it can work formally, otherwise the feeding switch and the mold failure signal will be out of control.
6、During the formal stamping process, since the static differential rate of the main motor varies with different loads, when stamping different parts, the electromagnetic register set on the control board can be used to correct the rotational speed.


    High-speed press is an indispensable and important equipment in modern industrial production.
    Its working principle is to drive the flywheel to rotate and store energy through the motor, and then through the control of the clutch and brake, the energy of the flywheel is instantly released to drive the slider to carry out high-speed reciprocating motion to realize stamping processing.
    The advantages of high-speed presses are numerous. Firstly, the extremely high stamping speed significantly improves the production efficiency and can complete a large number of stamping tasks in a short period of time. Secondly, the high-precision stamping capacity ensures the quality and consistency of the products, which meets the demand for the production of precision parts. Furthermore, it has a high degree of automation and can cooperate with various automation equipment to realize unmanned or less-manned production and reduce labor costs.
    In practical applications, high-speed presses are widely used in electronics, communications, automotive, home appliances and other industries. For example, in the field of electronics, for the manufacture of a variety of micro-connectors and chip pins; in the automotive industry, the production of automotive parts such as radiator pads, door lock parts, and so on.


Business philosophy

Dongguan OREKU Precision Machine Tool Co., Ltd., established in 2001, is a high-tech innovative enterprise dedicated to manufacturing high-precision machinery and equipment. Since its establishment, the company has focused on the R&D and manufacturing of CNC precision machining centers, precision stamping machining centers, high-speed vertical lathes and automated production lines, leading the development of the industry.

View more

Contact Us

R&D