Model: MARX-80T
Brand:Oreku Elbow Type Punching Machine
Precision: JIS special grade
Speed: 600 times/min
Tonnage: 80 tons
Stroke: 30mm
Price: Negotiable.
Parameters of 80 tons elbow joint type high speed press machine
Model:MARX-80T
Pressurizing capacity:800KN
Stroke: 20/25/32/40 mm
Stroke number:120-600/120-500/120-500/120-450 spm
Closed mold height: 240-320 mm
Slider adjustment: 80 mm
Slider size: 1380×580 mm
Table size: 1500×800 mm
Table thickness: 160 mm
Table opening size: 1160(top)×1160(bottom)×120 mm
Table opening size: 1200×160 mm
Main motor:30×4P kw
Upper mold weight: MAX500 kg
Total weight:22000 kg
External dimensions:3280×3380×1840 mm
Structure of 80-ton elbow joint type high-speed punching machine
Excellent embossing effect
Horizontally symmetrical elbow joint linkage structure makes the press slide movement near the lower dead center of the stamping curve smooth, obtaining excellent embossing effect and meeting the requirements of lead frame and other products. At the same time, the slider movement of the 80-ton elbow joint type high-speed press structure reduces the impact on the mold during high-speed stamping and prolongs the life of the mold.
80-ton elbow joint type high-speed punch press is used for
The 80-ton elbow joint type high-speed press can be used to press various kinds of precision hardware terminals, automobile wiring harness terminals, precision shrapnel, motor stator piece, motor core and so on.
80 tons elbow joint type high speed punch press accessories
1. Universal frequency converter + speed control shaft motor
2.Combined pneumatic clutch brake
3. Dynamic balancing device (weight-selective)
4.Electronic cam switch
5. Stop angle automatic correction device
6.Electronic crankshaft angle indicator gauge
7. Touch screen (Chinese: Simplified)
8.Speedometer
9.Total counter electronic 8 digits (touch screen)
10. Preset counter electronic 8-digit (touch screen)
11.Closed mold height display
12.Timer 7 digits
13.Motorized slide adjuster
14.Misfeeding socket (with switch) 1pc.
15.1 socket for stopping the tension limit
16.Micro inch movement
17.Circulating oil control unit
18.Air control unit
19.Material oil feeding device (with solenoid valve)
20.Safety door (front up/down type only)
21.Motor reversing device
22.Full stop circuit
23. Operating cabinet (with rolling wheels) body operating panel
24. Two-handed button (with 1-point CASE)
25.Oil temperature cooling device
Optional accessories for 80-ton elbow joint type high-speed press machine
1.Anti-vibration device
2.Precision cam-clamp feeder
3. Material guide (to the working end surface) a
4. Lower dead center detector
5. Cut-off counter (electronic 6-digit) 2 sets
6. Air injector (with solenoid valve) DC
7. Material drop hopper
8.Material end stop switch (proximity type)
9.Flywheel brake
How much is the stroke of 80 tons elbow joint type high speed punch press?
The stroke of 80 tons elbow joint type high speed punch press is 30mm.
80 tons elbow joint type high speed punch press working principle
1, before starting the machine, the speed potentiometer (W) set on the control panel should be adjusted to the lowest point (O point) position.
2、After the main power switch (DK) is turned on, the power indicator light is on, and the phase sequence indicator light should also be on, otherwise the phase sequence should be checked to see if it is correct.
3、Break the phase after turning on the control circuit with the key switch. Indicator lamp three should be bright at the same time, otherwise should check, troubleshooting.
4, clockwise adjustment of the "speed" potentiometer, the main motor drive flywheel start, the speed should be smooth without vibration, no impact and other phenomena exist.
5, in the process of connecting the main clutch, should be operated at the same time left and right hand. In the process of formal stamping, the external control key switch should be turned on and the key switch of the regulator should be in the state of reset before it can work formally, otherwise the feeding switch and the mold failure signal will be out of control.
6、During the formal stamping process, since the static differential rate of the main motor varies with different loads, when stamping different parts, the electromagnetic register set on the control board can be used to correct the rotational speed.
C-type high-speed punch press is a common type of punch press with the following features and advantages:
Structural features
The shape is “C” type, open body structure, the operation space is more open, convenient for the installation, debugging and maintenance of the mold.
Speed advantage
With the ability of high-speed stamping, the number of stamping times per minute can reach hundreds or even thousands of times, greatly improving the production efficiency.
Precision performance
Adopting advanced control system and precise transmission parts, it can realize high stamping precision and ensure the stability of product quality.
Scope of application
Widely used in electronics, electrical appliances, hardware and other industries, it can be used for stamping all kinds of small precision parts, such as connector terminals, chip pins and so on.
Energy-saving features
Some C-type high-speed presses adopt energy-saving technology, which can effectively reduce energy consumption and production costs.