How to use the punch press mould

  Introduce the use of punch press mould:

    First, the mould should be strictly inspected before installation and use to clean up the dirt to check whether the guide sleeve and mould of the mould are well lubricated.
Second, regular inspection of the punch press turntable and mould installation base to determine the coaxial accuracy of the upper and lower turntable.
Third, according to the mould installation procedures will be convex-concave mould on the turntable to determine the direction of the convex-concave mould is consistent, especially with the direction of the requirements of the non-circular and square, the more the mould should be attentive to prevent the installation of the wrong, the installation of the reverse.

High Speed Punching Machine

   Four, punch press mould should be checked after the installation of the mould mounting base fastening screws are locked without error.
When the edge of the convex and concave dies of the press moulds are worn out, they should be stopped and sharpened in time, otherwise it will expand the degree of wear of the edge of the moulds and accelerate the wear of the moulds and reduce the quality of the punched parts and the life of the moulds.
Sixth, for the mass production of the use of general-purpose moulds should be backed up in order to rotate production to determine the production needs.

High Speed Punching Machine

    Seven, stamping personnel to install the die should use softer metals such as copper, aluminium, etc., made of operating tools to prevent the installation process of knocking, smashing damage to the die.
Eight, the mould delivery process should be light to hold and put never allowed to throw and touch in order to avoid damage to the edge of the mould and guide.
Nine, punch press moulds should be used in a timely manner after the return to the designated location and for the oil rust treatment.

High Speed Punching Machine