VC Heat Sink C-Type High-Speed Punch Press - What Is The Price Of C-Type High-Speed Punch Press?

VC heat sink c-type high-speed punch press - What is the price of c-type high-speed punch press?

Dongguan OREKU machinery is a professional manufacturer of c-type high-speed punch press, after the combination of technology with Japan, innovation and development of a new generation of punch press. And provide what is a c-type high-speed punch press introduction and selection of what is a c-type high-speed punch press requirements, what is the price, tonnage, stamping products for your reference.
What is a c-type high-speed punch press?

Open type CNC punching machine: structure shape C-type, one side is open. Cheap cost, easy up and down workpiece, convenient for large sheet metal processing. The opening of the body of the open type punch press is open, which is convenient for feeding in the front-back and left-right directions. The shortcomings are: low workstation tonnage can only do 35 tons, more than 35 tons of precision decline.

1.C-type high-speed punch press advantages:
Generally used in the nominal pressure of about, but because of the operability, mold proximity is good, easy to change the mold and other favorable factors, is still widely loved, while the machine price is also relatively low, is the mainstream of the current stamping machinery.

2. C-type high-speed punch press disadvantages:
C-type high-speed press because the body is not symmetrical, stamping backlash will cause deformation of the body before and after the opening part, resulting in the deterioration of the mold parallelism, is a major drawback, so but the capacity of the press is about 300 tons or less.

C-type high-speed punch press price
The c-type high-speed punch press includes between 16 tons-85 tons, the price of different tonnage is different, the price range varies between 40,000-250,000 yuan.

Requirements for choosing c-type high-speed punch press
1. The nominal pressure of the press must be greater than the stamping process force. But for the longer working stroke process, not only as long as to meet the size of the process force can be, must also be considered to meet the work load curve.
2.C-type high-speed press slide stroke should be satisfied with the height of the parts can be obtained in the required size, and in the stamping process can be smoothly removed from the mold after the completion of the mold. For stretching parts, the stroke should be more than twice the height of the parts.
3. The number of strokes of the press should be in line with the requirements of productivity.
4. C-type high-speed punch press closing height, table size, slide size, die handle hole size should be able to meet the requirements of the correct installation of the mold, for the crank small punch press, the closing height of the mold should be in the small punch press between the greater height of the larger clamping height and the smaller clamping height.
 
C-type high-speed punch press can be stamping products

1、Motor stator: motor stator, servo motor stator, servo motor motor stator, stepping motor stator, motor class stator
2、Mesh: protective barbed wire, horn mesh, blade barbed wire
3, led bracket: led round cup bracket, led filament bracket, Led ceramic filament bracket, LED auxiliary bracket clip, led reverse single crystal bracket
4、Heatsinks: led heatsinks, copper heatsinks, electronic heatsinks, aluminum alloy heatsinks, triode special heatsinks, circuit board heatsinks
5、Connector: automotive connector terminals, low-frequency circular connectors, rectangular connectors, printed circuit connectors, RF connectors, fiber optic connectors
6, precision terminals: transformer EI piece, crystal head chip, USB, connectors, shrapnel, toys accessories, small springs, watch accessories, saw blade, shielding, all kinds of chicken eyes, metal jewelry
7, lead frame: IC lead frame, semiconductor lead frame
Tonnage of c-type high-speed punch press
C-type 16 tons, 25 tons, 45 tons, 65 tons, 85 tons high-speed punch press.
Standard function accessories

    Two-hand movable push-button bath table
    Cutting/Inching/safety-stroke/continuous stroke
    Lubricating oil cooling system
    Slide balancing device
    Motorized slider adjustment device
    Digital mold height indicator (unit:0.01MM)
    Automatic forced circulation lubrication feed oil
    Slide balancing device
    Crankshaft angle indicator (electronic)
    Reversing device
    Air jet device
    Air source connector
    Slider eight-sided roller bearing guide
    Adoption of 10-point electronic cam output signal
    Frequency converter

  How to judge the strength of c-type high-speed punch press manufacturers

1. Look at the press stamping process
1.1 According to the nature of the stamping process to be accomplished, the size of the production batch, the geometry of the stamped parts (including the thickness, whether or not to stretch, the shape of the sample) and precision requirements to determine:
1.2 In the production of small and medium-sized partially cut parts and curved parts and polyester parts, open-type mechanical presses are used.
1.3, in the production of medium-sized stamping parts using closed form of mechanical press.
1.4, small batch production, the production of large thick plate stamping parts using hydraulic presses.
1.5, mass production or the beginning of the mass production of complex parts, the selection of high-speed punch press or multi-station automatic punch press.
2. Look at the punch press power type
Does not say is the traditional punching machine, or pneumatic precision punching machine, or high-speed punching machine, the price difference is a lot!
3. Look at the appearance of high-speed punching machine
Look at the gantry or open type, shell is casting or steel frame.
Translated with DeepL.com (free version)