How should I maintain the molds for stamping aluminum plates with a high-speed press?

    High-speed press machine stamping aluminum plate die maintenance need to pay attention to the following aspects:
    Regular cleaning
        After each use, remove aluminum chips, oil and other debris from the die surface to prevent them from entering the die gap affecting accuracy and causing wear.

       High-speed press for stamping aluminum plates

    Lubrication treatment
        Choose high quality lubricant suitable for aluminum plate stamping and apply it to the working part of the die regularly to reduce friction and wear.
    Checking die wear
        Regularly check the key parts of the mold, such as punch, concave die, etc., and observe the degree of wear. For slight wear, they can be repaired; severely worn parts should be replaced in time.

     High-speed press for stamping aluminum plates

    Check die clearance
        Ensure that the die clearance is even and meets the requirements of aluminum sheet stamping. Unsuitable clearance will lead to quality degradation of stamped parts and accelerated damage of the die.
    Rust prevention treatment
        If the die is not used for a long time, it should be treated with anti-rust treatment by applying anti-rust oil and covering it with plastic film to prevent rusting.
    Storage environment

      High-speed press for stamping aluminum plates

        The molds should be stored in a dry and well-ventilated environment, avoiding humidity and high temperature, so as not to affect the performance and life of the molds.
    Regular Maintenance
        Comprehensively disassemble, clean, inspect and maintain the mold according to a certain cycle, including tightening loose parts, replacing aging seals, etc.
    Avoid overload stamping
        Strictly control the stamping parameters during operation to avoid damage to the mold due to overload stamping.