OREKU focuses on precision machinery for 25 years

What to do when a high-speed punch press malfunctions

2024-05-03 09:34:26 HYguanSAM007 4

What to do when a high-speed punch press malfunctions

  The more common failures are:
1. High-speed punch press inching or linkage for some reason can not run makes the punch press no way to stop in time;
2. The red light of the second degree drop will not be dark, always on;
3. The press can not automatically adjust the motorized slider;
4. The counter does not work properly and so on.
 The following are mainly about the reasons for the first two failures and the solution to these two failures.

Stamping cell phone SD card terminals

     First of all, the high-speed punch press inching or linkage for some reasons can not run, resulting in its inability to run for a variety of reasons. The first point is that the button switch of the punch press has a fault when switching, then just replace the bad switch on the line. The second point is that the line of the high-speed punch press is detached or broken, resulting in the failure of the punch press line, this time to remove the damaged line and replace it with a new line. The third point is that the PC control input of the punch press is abnormal, which means that the PC controller of the high-speed punch press fails, it is necessary to find professional maintenance personnel to detect the PC controller and repair it. High Speed Stamping Equipment

       Then the cause of the second degree of red light will not be dark, has been on the reason is the punch press clutch and brake clearance is too large, not adjusted back, which will lead to brake time extension and angle of the shift, then as long as the reference to the clutch and brake adjustment method to adjust the gap back to be good; it may also be the cause of the punch press there is an overload, then the second degree of red light will be ineffective, and even will make the punch press Stop working. High Speed Stamping Equipment

      In the use of high-speed punch press, if a failure occurs, first of all do not be anxious, to first find out the cause of the failure, in the cause of the symptomatic medicine, can be easily solved.

      High Speed Stamping Equipment

    High-speed punching machine compared to ordinary punching machine, there are mainly the following aspects of difference. First of all, the stamping speed, high-speed press is usually much faster, the number of times per minute can reach hundreds or even thousands of stamping, while the ordinary press is relatively slow.
    Secondly, in terms of precision, the precision of high-speed presses is usually higher, to meet the needs of more precise parts stamping. Furthermore, the structural design and parts selection of high-speed presses pay more attention to stability and durability to adapt to the requirements of high-speed operation.

Business philosophy

Dongguan OREKU Precision Machine Tool Co., Ltd., established in 2001, is a high-tech innovative enterprise dedicated to manufacturing high-precision machinery and equipment. Since its establishment, the company has focused on the R&D and manufacturing of CNC precision machining centers, precision stamping machining centers, high-speed vertical lathes and automated production lines, leading the development of the industry.

View more

Contact Us

R&D