Causes of press accidents and how to avoid them-OREKU Precision High Speed Punching Machine

    The root cause of press accidents is the lack of necessary protective devices and facilities, no operation of hazardous processes to implement effective labor protection. The technical cause of punch press accidents is the mismatch between the operator's movements and the operation of the machine tool.high speed punch press

   Injury accidents on presses often occur under the following circumstances:
    (1) The operator feeds the material by hand, which is physically demanding and fatiguing after a long time.
    (2) The operator is mentally fatigued, losing concentration and making mistakes
    (3) The mold structure is not reasonable, the operation action is miscellaneous, and the operator's arm stays in the mold area for too long.
    (4) The operator's arm does not leave the mold area on the start-up slider.
    (5) Closed-type punch press multi-operator use foot start switch control along the block travel, hand and foot with improper.
    (6) Closed type punch press working with many people, out of the guardian to control the travel of the slider, the other operators are not well taken care of.
    (7) Adjustment of the mold, the machine tool motor did not stop, due to the operation into other reasons for sudden start.
    (8) Punching machine mechanical and electrical failure, the slider movement out of control.
    (9) The environment is dark or cluttered, the site is small or not ventilated and other poor operating environment.
  The main reason of causing press injuries in the management is that the safety system is not sound, and accidents are easy to happen in the following situations.high speed punch press

  (1) Workers are not qualified to operate the machine without training.
  (2) Operation against the rules.
  (3) The punch press itself has no safety device
  (4) The equipment is out of repair.
  (5) There is a safety device but did not start.

 
OREKU high-speed precision punching machines avoid these problems. Our high-speed precision punching machine all configured with safety equipment: automatic feeder, punching machine with the operating table, safety mold status and a number of safety devices, and do not need to use a large number of employees to supervise, for OREKU's automatic punching machine customers boldly rest assured that you will never let you buy unhappy products. If you are interested in OREKU, please call us, OREKU will be happy to serve you

high speed punch press