How to hit the reverse rotation of the mechanical punch press

   How to hit the reverse rotation of the mechanical punch press

Antenna Shrapnel High Speed Punching Machine

 Mechanical punch presses can be reversed manually die height, available wrenches to raise the die height, die killed just open the overload air valve behind the punch press and bleed off the air the punch can be turned over. Usually two steel clutches are used to drive crankshafts over 100 tons so they can be reversed, but you must use the point method, do not turn them over and break the clutches.

Antenna Shrapnel High Speed Punching Machine

      Preventing mold seizure
    When the die jamming detector detects the die jamming of the press, the die jamming detector sends a signal to the PLC program controller, which controls the main motor reversing switch to close, at which time the main motor reverses, and the upper die mounted on the slider of the high-speed press is lifted up by the reversing action of the main motor.
This effectively and quickly solves the phenomenon of mold jamming that occurs during the actual use of the high-speed press. The main features of the high-speed press are: 1. Adopting multi-station stamping process, it has the advantages of large capacity of one-time molding and high productivity; 2. Simple and compact structure, easy and reliable operation, smooth operation without vibration noise and vibration harmful effects on human body.

Antenna Shrapnel High Speed Punching Machine