Continuous and fully automatic production line for high-speed punching machine metal orifice plate corrugated packing

  OREKO High Speed Punch Metal Orifice Plate Ripple Filler Continuous Fully Automatic Production LineMetal button punching machine

  OREKO High Speed Punching Machine has released what we believe is currently a highly efficient continuous fully automatic production line for corrugated metal orifice plates and fillers. Our high efficiency lies in the fact that the stamping machine can punch 200-1000 times per minute. The entire high-speed punching machine production line includes a coil support, OREKO High Speed Punching Machine, a drawing machine, a stamping mold, a feeding machine, a feeding machine, and a cutting machine; The high-speed feeding machine includes a connecting rod connected to the high-speed punching machine for metal orifice plates. The OREKO high-speed punching machine integrates automatic feeding machine, punching punching machine, pulling machine, fine grain rolling machine, receiving machine, shock wave punching machine, etc. to achieve continuous production of fully automatic metal orifice plate corrugated filling material, with high production efficiency, high product quality, safe production, and convenient operation.Metal button punching machine

  OREKO High speed Punch is a production equipment for chemical metal orifice plate corrugated packing, especially a continuous production line for metal orifice plate corrugated packing.
   Metal orifice plate corrugated packing is a type of metal regular chemical packing. It is assembled by punching holes on the surface of metal sheets, rolling small and large ripples, and has the characteristics of low resistance, uniform gas-liquid distribution, high efficiency, large flux, and unclear amplification effect. It is used in negative pressure, atmospheric pressure, and pressurized operations. The metal orifice plate corrugated packing maintains the structural characteristics of the metal wire mesh corrugated packing, and is made of orifice plates with grooves on the surface, which increases the uniformity of liquid distribution and the wetting performance of the packing, and improves the mass transfer efficiency. Metal orifice corrugated packing is widely used in distillation, absorption, and extraction operation units. The production process and organizational form of the production line are not fixed, and the production lines of high-speed punching machines for fillers from different manufacturers are also different. However, there are problems with the inability to achieve continuous production in the filler production lines of each manufacturer, which leads to low production efficiency of corrugated metal hole plate fillers.
   The technical solution adopted by Sanhao High Speed Punch to solve the technical problems in market stamping technology is: Sanhao fully automatic metal orifice plate corrugated filler continuous stamping production line, including sequentially set material coil support, punching punch, drawing machine, stamping mold, feeding machine, feeding machine and cutting machine; The automatic feeding machine is connected to Sanhao High Speed by a connecting rod, thereby achieving a synchronous process of automatic feeding and automatic stamping.Metal button punching machine