How to adjust the die height of high-speed punching machine What is the method of

    1, manual mold adjustment: high-speed punch press by the ball screw, pinion, gear, digital transmission gear, digital transmission shaft, ball gland, external digital display device composed of overload cylinders and the inner base of the combination of equipment, usually more suitable for 60T or 60T below the high-precision punch press. Adjustment is: first use a hook wrench to loosen the set screw to the right. Secondly, take out the ratchet handle and set it at the slider adjusting lever. If the mold loading height (i.e. closing height) needs to be raised, then rotate the handle clockwise.High-speed punch press structure

     2, if the mold height (i.e., closing height) need to reduce, then counterclockwise rotation of the handle, at the same time through the mold height indicator can be seen in the correct height of the slider, do fine fine-tuning. Finally, after several adjustments to determine the optimum die height after the use of hook wrenches to lock the screws, that is, to complete the adjustment of the die height of the precision punch press.

     3、Electric die height adjustment: the standard configuration of the electric die-adjusting device used is a digital die height indicator, and this kind of adjustment is especially suitable for the high-precision punch presses above 80T and 80T; the adjustment method is as follows: place the press slider adjustment selector knob in the "ON" position, and press the "slider down" button if the die height (i.e. closing height) needs to be reduced. Slide down" button, staring at the "mold height indicator", adjusted to the appropriate height, relax the button. If the mold height (i.e., the closing height) needs to be raised, press the "slider up" button, watch the "mold height indicator", and then release the button when it is adjusted to the proper height.High-speed punch press structure
High-speed punch press structure