How to connect the control box of high-speed punching machine? OREKU Precision Punching Machine will show you!

  The connection between a high-speed press and a control box involves the electrical connection and the setting of the control system.As a high-quality stamping equipment, OREKU Precision Punching Machine needs to follow certain steps and precautions in the process of connecting with the control box. The following are the general steps for connecting a high-speed punch press with a control box, which will also be explained in relation to the characteristics of the OREKU punch press:

High Speed Stamping Equipment

 I. Preparation
1. Confirm that the specifications, models and electrical parameters of the control box and punch press match.
2. Prepare the required cables, connectors, fasteners and other electrical connection materials.
3. Make sure the working environment is safe and disconnect all power supplies to prevent the risk of electric shock.
II. Connecting cables
1. According to the wiring diagrams of the control box and punch press, determine the way to connect the cables.
2. Use suitable cables to connect the control box with the punch press, make sure the cable length is moderate to avoid inconvenience caused by too long or too short.
3. When connecting the cables, pay attention to the firmness of the joints and the reliability of the electrical connections.
III. Setting up the control system
1. set the control system parameters of the control box according to the use requirements of the press.
2. debug the control system to ensure that the press can work normally according to the set parameters. 3.
3. In the process of setting, pay attention to follow the operating procedures of the control system to avoid malfunction of the equipment due to misoperation.

High Speed Stamping Equipment

High Speed Stamping Equipment