In the punching process, in order to make the first sheet of the stack of sheet material and the following sheet material separation, you can take the following two methods: method -: magnet plus air pump blowing method
1. Add magnets to the side baffles of the iron sheets in the stack. The use of magnets of the same level of repulsion principle, close to the magnet of the iron sheet will naturally buckle, so as to realize the first and the following sheet material separation. Pake if high-speed equipment (such as high-speed punching machines, etc.), but also need to cooperate with the air pump blowing wind for sub-pieces, in order to ensure that each piece of material can be separated smoothly.
high-speed punch press working principle
Method two: vibration equipment method
1. The use of vibration equipment such as vibrating plate, vibrating screen or vibrating conveyor, etc., through constant vibration will be a stack of sheet material for separation. This method is suitable for the case of small flakes and regular shape.
2. Pieces are effectively separated one by one and the position of each piece on the press is ensured.
high-speed punch press working principle
Please note that the exact method to be used depends on factors such as the material, shape and size of the sheet. In practice, you can choose the appropriate method according to the specific situation and adjust the parameters of the equipment to ensure the best separation effect. At the same time, attention should be paid to safety during operation to avoid accidents.
The above is our OREKU high-speed punch press company here to give you an introduction on how to quickly solve the problems arising from the production of stamping, I hope to help you! Welcome the majority of users to call us for advice!2.
high-speed punch press working principle
High-speed punching machine compared to ordinary punching machine, there are mainly the following aspects of difference. First of all, the stamping speed, high-speed press is usually much faster, the number of times per minute can reach hundreds or even thousands of stamping, while the ordinary press is relatively slow.
Secondly, in terms of precision, the precision of high-speed presses is usually higher, to meet the needs of more precise parts stamping. Furthermore, the structural design and parts selection of high-speed presses pay more attention to stability and durability to adapt to the requirements of high-speed operation.
Dongguan OREKU Precision Machine Tool Co., Ltd., established in 2001, is a high-tech innovative enterprise dedicated to manufacturing high-precision machinery and equipment. Since its establishment, the company has focused on the R&D and manufacturing of CNC precision machining centers, precision stamping machining centers, high-speed vertical lathes and automated production lines, leading the development of the industry.
View more