Introducing the maintenance of high-speed punching machine for heat sinks

     Here are some maintenance methods for the heat sink high-speed punch press:

    Daily cleaning
        At the end of each day's work, clean the surface of the punch press of dust, oil and debris to keep the appearance of the equipment neat and clean.
        Pay special attention to clean the dirt on the slider, guide rail, screw and other moving parts to prevent wear and jamming.
    Lubrication system maintenance

hardware stamping video

        Regularly check the oil level of the lubricating oil tank to ensure sufficient oil.
        Replace the lubricating oil according to the specified cycle to ensure the cleanliness and quality of the lubricating oil.
        Clean the lubrication pipeline and oil pump to prevent clogging.
    Inspection of fastening parts
        Regularly check whether the bolts and nuts of the connecting parts of the press are loose and tighten them in time.
        Focus on checking the connection fastening of key parts such as slider and guide rail, crankshaft and connecting rod.
    Electrical system inspection
        Regularly check the electrical lines for damage and aging to avoid short circuit and leakage.
        Clean the dust inside the electrical control cabinet and check whether the contact of electrical components is good.

hardware stamping video

hardware stamping video