Model: DDL-220T
Brand:OREKU High General Precision Machine
Precision: JIS special grade
Speed: 600 times/min
Tonnage: 220 tons
Stroke: 30mm
Price: Negotiable.
Motor iron core precision high-speed punch press accessories
1.Motorized die height adjustment
2. Die height display precision 0.01
3. Inching function Single function Linkage function
4. Linkage with 0° and 90° positioning and stopping function
5. Six groups of batch control
6. Two groups of slanting groove control
7. Hydraulic mold clamping
8.Hydraulic seat screw pile
9. Hydraulic mold lifter and mold lifting arm
10.Lubricated cooling circulator
11.Independent electric control box
12.Positive and negative reversing device of main machine
13.Integrated brake clutch
14.Spring-type anti-vibration feet
15.Working light
16.Maintenance tools and tool box
Motor iron core precision high-speed punch press optional accessories:
1.Gear feeder (width selection: 150/200/300/400)
2.NC servo feeder
3.Double-head material holder (hydraulic expansion/manual expansion) (width selection: 200/300/400)
4.S-type leveling machine
5.Tonnage detector
6.Lower dead center monitor
7.Electric control box air conditioner
8.Frequency conversion permanent magnet motor
Motor core precision high-speed punching machine parameters
Nominal force: 220T
Capacity generating point: 3.2 mm
Stroke: 30 mm
Number of strokes: 150-600 s.p.m.
Working table area:2000×950 mm
Unloading hole: 1400×250 mm
Slide area: 2000×700 mm
Die height adjustment stroke: 370-420 mm
Mold height adjustment motor: 1.5 kw
Feeding line height: 200±15 mm
Main motor: 45 kw
External dimensions: 3060×1940×4332 mm
Total weight: 40 tons
Structure of motor core precision high-speed punching machine
Motor core precision high-speed press stamping products
Motor iron core precision high-speed punch press maintenance:
1, often keep the center column, the slider guide column clean, as well as racking the mold to keep the mold base plate free of dirt to ensure the cleanliness of the platform to avoid scratches. 2, the new machine in the use of 1 month, the flywheel at the addition of grease (including feeder), if not refueled for a long time, will lead to internal wear of the flywheel, affecting the performance of the machine tool, and each subsequent maintenance also need to be added (high temperature 150 ℃ more than the grease)
3, the replacement of machine circulating oil: new machine in 1 month to replace 1 time, and then every six months to replace 1 time, to ensure the normal operation of the machine tool and precision (32 # mechanical oil or Mobil 1405 #)
Motor core precision high-speed punching machine use method:
1, before starting the machine, the speed potentiometer (W) set on the control panel should be adjusted to the lowest point (O point) position.
2、After the main power switch (DK) is turned on, the power indicator light is on, and the phase sequence indicator light should also be on, otherwise the phase sequence should be checked to see if it is correct.
3、Break the phase after turning on the control circuit with the key switch. Indicator lamp three should be bright at the same time, otherwise should check, troubleshooting.
4, clockwise adjustment of the "speed" potentiometer, the main motor drive flywheel start, the speed should be smooth without vibration, no impact and other phenomena exist.
5, in the process of connecting the main clutch, should be operated at the same time left and right hand. In the process of formal stamping, the external control key switch should be turned on and the key switch of the regulator should be in the state of reset before it can work formally, otherwise the feeding switch and the mold failure signal will be out of control.
6、During the formal stamping process, since the static differential rate of the main motor varies with different loads, when stamping different parts, the electromagnetic register set on the control board can be used to correct the rotational speed.
High-speed press is an advanced stamping equipment with the following significant features and advantages:
High Speed
Extremely high stamping frequency, up to hundreds or even thousands of times per minute, significantly improving production efficiency.
It can meet the needs of mass production and quickly complete a large number of stamping tasks.
High Precision
Equipped with precise control system and transmission components to ensure the dimensional and shape accuracy of stamped parts.
Precision stamped products with extremely small tolerance and stable quality can be produced.
High Stability
Adopting high-quality materials and advanced manufacturing process to ensure the stability of the equipment in long-time operation.
Reduce the fault downtime and improve the utilization rate of the equipment.